image - DEFAULT

Ρητίνη Phrozen Aqua Gray 4K 1kg

45 €(χωρίς ΦΠΑ)
Κατόπιν Παραγγελίας
Phrozen
PH-RE-AQGR-1
Density 1.1 g / cm3
Viscosity 150 cps
Tensile Strength (Break) 2 Mpa
Elongation 7 %
I-ZOD Impact Strength 6.78 KJ/m2
Surface Hardness, Shore D 77 Shore D
Water Contact Angle 35 degree
Color Gray
Προσθήκη στο καλάθι

Phrozen’s new Aqua 4K resin is designed to showcase 3D models in high resolution and works best with the Sonic Mini 4K / Sonic Mighty 4K 3D Printer. The formula is created to allow every designer to print the exact replica of their designs with the added benefits of no shrinkage and low odor.

  • Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
  • Use and preserve resins in room temperature, and in dark and ventilated conditions
  • Shake well before each use
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
  • Keep resin away from kids and away from direct sunlight exposure
  • Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.